![anytone at d868uv programming anytone at d868uv programming](https://www.dmrfordummies.com/wp-content/uploads/2017/11/anytone-e1510067258803-225x300.jpeg)
To find the destination number of the APRS tag, refer to the brandmeister wiki site. Specify the transmission timeslot (typically the one corresponding to the channel – step 1 – You can then leave the Channel Slot setting) Enter the destination identifier of the APRS beacon and its call type (generally Private). At the bottom of the screen, the coordinates directly in decimal format can be used.ħ. To determine a fixed location, you can use and click on the map. Enter your fixed position in decimal format Used : APRS beacons are sent using the fixed point defined in the “ddd.ddddd” box.Ħ.The GPS must first be activated and the GPS position determined (measured) by the Anytone. Not Used: APRS beacons are sent from the GPS position.Fixed GPS Beacon (This to mean that the beacon is a fixed point or GPS origin) Define the power level of the APRS beacon (for hotspots, prefer the low level (Low))ĥ. In the “Digital APRS Information” screen, enter the beacon transmission period in manual. Open from the left menu the “Digital APRS Information” screenĢ. Open the channel settings screen and select :ġ. APRS beacon will be emit on the frequencies, color code, and timeslot corresponding to the repeater or hotspot you are using. You must first select one of your channels as the default APRS channel. APRS settings Step 1: Activate APRS on the channel Added feature: APRS GPS position transmission via DMR network. Acceleration of the switching time from one zone to another with the up and down keys.ĥ. In the CPS- software, menu Optional Setting => Display => CH Switching Keeps Last Caller, allows to keep the display of the last heard station whenĦ. press P2 key, the radio will allow deleting the channel.ģ. Fixed time error in Call Log => Last Call => Last Call List.Ĥ.hold pressing MENU key, until the LCD display “Next Please Press Dial Key”,.Press P1 key, the radio will enter into new channel setup.Hold pressing MENU key, until the LCD display “Next Please Press Dial Key”,.This is to be used after creating a new channel. In the rig menu, Talk Group => TG List => Select => Select Contact, allows you to assign a newTG for the current channel.All zeros that were displayed in 0 are now crossed out, in Ø, on the Anytone ATD-868UV display.